PIXMA Printer PRO-10S Wireless Connection Setup

By Posted on

Canon PIXMA Printer PRO-10S Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (in some cases referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This lets permitted products this kind of as your Canon PIXMA PRO-10S to attach on your network devoid of needing to enter a password, and it will allow a speedy and quick method of connecting your products.

This system is undoubtedly the easiest implies of connecting your Printer PRO-10S Wireless, so if your accessibility level has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for guidelines on connecting generating use of this course of action. If the router would not assistance WPS we have supplied selection tips to have your Canon PIXMA PRO-10S linked so please pick the ‘Standard Connection Method’ tab under.

Printer PRO-10S Wireless

Printer PRO-10S Wireless

Printer PRO-10S Wireless WPS Connection Method

Ahead of we start off, some circumstances have to be attained to function with the WPS press button course of action:

  1. The accessibility challenge has to have an real bodily WPS drive button made available. Remember to examine along with your device’s shopper manual for specifics. In situation the WPS drive button is not obtainable, you really should use the suggestions to the Regular Connection Method tab.
  2. Your network have to be making use of the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue soon after which head to your accessibility spot and push the (WPS) button within two minutes. For serious facets about pressing the WPS button, bear in mind to test with the accessibility challenge guide.

The blue Wi-Fi lamp close to the printer will preserve on ?ash though trying to find for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even start off to flash. When the printer has produced a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is effectively linked to your wi-fi network, you may possibly print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information web page will be printed.

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA PRO-10S.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nevertheless failing soon after following this manual, please contact us for even further help.

Printer PRO-10S Wireless Standard Connection Method

Remember to use the hyperlinks down under to test out the accurate suggestions for the working system:

Printer PRO-10S Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop the moment a lot more and click on (My Laptop) or (This Computer method), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be absolutely sure to receive the manuals and software program bundle.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers presently linked. If this is the initial time you are setting up your printer, it will not be discovered. So please make certain that (Setting printer could not be found on the checklist) is chosen, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two instances and release soon after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes swiftly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which laptop software program you want to set up at this time, actually do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer the moment once more. Based on your local community configuration, it may possibly effectively consider a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the product or service inside of your printer as effectively as determine (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initial time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu software program, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer PRO-10S Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make absolutely sure you phone us for even a lot more enable.

Printer PRO-10S Wireless Cableless Setup system (For Mac customers only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer PRO-10S Wireless
  2. When the following display is displayed, click Open.Printer PRO-10S Wireless
  3. When the first display seems, click on (Next).
  4. You may possibly be asked to sort in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the incredibly initial time you could be spot up your printer, it’ll not be found. So bear in mind to make absolutely sure that (Environment printer could not be located on the checklist) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two instances and release soon after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes swiftly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the subsequent message is displayed, click on (Allow).
  17. Once the connection to the accessibility level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, do not stress, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly initial time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu software program, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer PRO-10S Wireless the Mac setup

If the wireless setup is nevertheless failing soon after following this manual, please contact us for even further help.  or get Information from Official Website Canon

Related posts: