PIXMA Printer iX6840 Wireless Connection Setup

By Posted on

Canon PIXMA Printer iX6840 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (from time to time referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This permits permitted gadgets this kind of as your Canon PIXMA iX6840 to attach on your network devoid of needing to enter a password, and it will allow a rapid and simple method of connecting your gadgets.

This system is undoubtedly the easiest implies of connecting your Printer iX6840 Wireless, so if your accessibility stage has a WPS button, please choose the ‘WPS Connection Method’ tab underneath for directions on connecting building use of this procedure. If the router would not help WPS we have offered solution recommendations to have your Canon PIXMA iX6840 linked so please choose the ‘Standard Connection Method’ tab under.

Printer iX6840 Wireless

Printer iX6840 Wireless

Printer iX6840 Wireless WPS Connection Method

Ahead of we start out, some problems should be attained to perform with the WPS press button procedure:

  1. The accessibility difficulty has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you must employ the suggestions to the Regular Connection Method tab.
  2. Your network should be applying the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue soon after which head to your accessibility location and push the (WPS) button within two minutes. For actual facets about pressing the WPS button, recall to examine with the accessibility difficulty guide.

The blue Wi-Fi lamp about the printer will preserve on ?ash whilst looking for for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has produced a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is the right way linked to your wi-fi network, you might print out the local community configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information internet site will be printed.

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the good identify of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software package to make the most out of your Canon PIXMA iX6840.
  • If you do not have the set up CD that came with your item, please download the manuals and software.
  • If the wireless setup is even now failing soon after following this manual, please contact us for even more help.

Printer iX6840 Wireless Standard Connection Method

Remember to use the hyperlinks down under to examine out the accurate suggestions for the working system:

Printer iX6840 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc the moment much more and click on (My Laptop) or (This Computer method), select the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be positive to get the manuals and software package package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
  6. The software package will now briefly search your network for any printers previously linked. If this is the initially time you are setting up your printer, it will not be observed. So please assure that (Setting printer could not be found on the record) is picked, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two instances and release soon after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which pc software package you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software package package deal will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer the moment once more. Based on your local community configuration, it might nicely get a minute or so for that software package package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the item inside of your printer as nicely as determine (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initially time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software package, so click (Cancel).
  24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer iX6840 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make positive you phone us for even much more assistance.

Printer iX6840 Wireless Cableless Setup system (For Mac customers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer iX6840 Wireless
  2. When the following display is displayed, click Open.Printer iX6840 Wireless
  3. When the first display seems, click on (Next).
  4. You might be asked to form in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for pretty much any printers now linked. If this can be the quite initially time you could be area up your printer, it’ll not be found. So recall to make positive that (Environment printer could not be located on the record) is picked, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two instances and release soon after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software package you want to set up, and then click on (Next). If you are not positive which software package you want to set up at this stage, really do not fret, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to produce an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software package will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initially time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software package, so click (Cancel).
  32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer iX6840 Wireless the Mac setup

If the wireless setup is even now failing soon after following this manual, please contact us for even more help.  or get Information from Official Website Canon

Related posts: